Digital Security Controls PC1575 Dokumentacja Pobierz pdf (Strona 21)

P R O G R A M D E S C R I P T I O N S

By default, the Swinger Shutdown limit is set to [003]. The

panel will not send more than three alarm signals for each

zone until the Swinger Shutdown is reset.

Swinger Shutdown will be reset every day at midnight or

when the panel is armed. Once reset, the panel will again

communicate normally.

Swinger Shutdown .......................................... Section [62]

5.17 Transmission Delay

If Transmission Delay is being used, the Opening

After Alarm code must be programmed. See section

5.7 “Communicator Reporting Codes”.

New customers often cause false alarms while becoming

familiar with the system. The Transmission Delay is designed

to delay the communication of a zone alarm for a programmed

period of time. If the system is disarmed before the

transmission delay time expires, the panel will not report the

alarm to the central station. The Opening After Alarm code,

however, will still be communicated to the central station. By

default, the Transmission Delay is not programmed.

Transmission Delay........................................... Section [62]

5.18 Event Buffer

The panel will store the last 100 events which occurred on

the system. The Event Buffer will contain the name, time and

date of each event, along with the zone number, user code

number or any other information pertaining to the event.

If the Event Buffer Follows Swinger Shutdown option is

enabled, the Event Buffer will not store events after the

Swinger Shutdown level has been reached. This will prevent

the panel from overwriting the entire buffer if a problem exists.

The Event Buffer can be viewed in three different ways: from

an LCD keypad

(see Section 3.4 – [(see Section 3.4 – [

(see Section 3.4 – [

✱✱

✱

] [6] “User Functions”)] [6] “User Functions”)

] [6] “User Functions”)

printed on-site using the PC5400 printer module

(see Section(see Section

(see Section

5.24 – “On-Site Printer”5.24 – “On-Site Printer”

5.24 – “On-Site Printer”

) or it can be uploaded using DLS

software.

Event Buffer Follows

Swinger Shutdown ......................... Section [11], Option [2]

5.19 Keypad Lockout

The panel can be programmed to “lock out” keypads if a

series of incorrect user codes are entered. Once the Number

of Invalid Codes Before Lockout limit has been reached,

the panel will lock out the keypad for the Lockout Duration

and log the event to the Event Buffer. For the duration of the

Lockout, the panel will sound an error tone when any key is

pressed.

Keypad Lockout will reset every hour.

To disable the keypad lockout option, program the Number

of Invalid Codes Before Lockout as [00].

Number of Invalid Codes Before Lockout ...... Section [07]

Lockout Duration............................................... Section [07]

5.20 Keypad Blanking

If the Keypad Blanking option is enabled, the panel will turn

off all lights on the keypads when no keys are pressed for 30

seconds. The keys, however, will remain backlit.

The panel will turn the lights back on when any key is

pressed or when the entry delay begins or if an audible

alarm occurs.

Keypad Blanking Option ............. Section [11], Option [5]

5.21 Loop Response

The normal loop response time for all zones is 500

milliseconds. The panel will not consider a zone violated

unless it is violated for at least 500 milliseconds.

5.22 Keypad Tampers

If the Keypad Tampers Enable option is selected, the panel

will display and transmit a General System Tamper

Reporting Code if any keypad is removed from the wall.

When the keypad tamper is restored, the panel will transmit

the General System Tamper Restoral Reporting Code. All

keypads should be properly installed and secured before

enabling this option.

Keypad Tamper Enable .................. Section [11], Option [6]

General System Tamper Reporting Code ....... Section [38]

General System Tamper

Restoral Reporting Code

..................................

Section [39]

After enabling Keypad Tampers, it is recommended

to tamper and restore all keypads to ensure proper

functionality.

If Keypad Tampers are disabled and Keypad Tampers

had previously been indicated, the panel must be

powered down to clear the trouble.

5.23 LINKS 1000 Cellular Communicator

The LINKS 1000 Cellular Communicator can be used three

different ways: as the sole communicator for the panel, as a

back up for either or both phone numbers or as a redundant

back up to the land line communicator, where the panel will

call both the land line and via the LINKS. A LINKS Preamble

is programmable for each phone number in the event that

the land line number is local but the LINKS is required to dial

an exchange. When programming a LINKS Preamble, all

unused digits must be programmed with a hexadecimal “F”.

5.23.1 Using LINKS 1000 as the Sole Communicator

The panel can be programmed to report an event only using

the LINKS 1000 cellular communicator. To program this

option, select only the LINKS 1000 in the Communicator

Call Direction Options. The Call LINKS as well as Land

Line option must also be enabled.

When the selected event occurs the panel will only attempt

to call central station using the LINKS.

5.23.2 Using the LINKS 1000 as a Backup Communicator

The panel can be programmed to call using the LINKS 1000

Cellular Communicator if the panel is having difficulty

communicating an event using the land line. To program

this option, select both the phone number and LINKS

options in the Communicator Call Direction Options. The

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Komentarze do niniejszej Instrukcji

Brak uwag

Digital Security Controls PC1575 Dokumentacja Strona 21

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Security Controls PC1575