Digital Security Controls PC1575 Instrukcja Instalacji Strona 57
- Strona / 110
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
44
• PC4204 Trouble (PC40X0 files only)
This option will display the PC4204 status screen showing the AC, Battery and
Auxiliary Power Supply trouble status of all the PC4204s installed on the system.
• “Yes” indicates a trouble has occurred with a PC4204
• “No” indicates a trouble has not occurred.
• Tamper Reset Required (PC5015, PC5010, PC5008, PC4020
v2.x, PC4010 v2.x, PC1575/1580, PC1565-2P, PC1555/1565 or
PC580/585 files only)
Uploads the tamper status of zones.
• “Yes” indicates a tamper condition is present and it must be reset
before the panel can arm.
• “No” indicates a tamper condition is not present.
• Installer Lockout (PC5015, PC5010, PC5008, PC4020 v2.x,
PC4010 v2.x, PC1575/1580, PC1565-2P, PC1555/1565 or
PC580/585 files only)
Uploads the status of Installer Lockout.
• “Yes” indicates that Installer Lockout is enabled, and hardware
defaulting is impossible.
• “No” indicates that Installer Lockout is disabled.
Arm / Disarm
This option is used to arm and disarm partitions. When you select this function, a
menu will appear where you can select which partitions to arm, and which partitions
to disarm. Select the partitions you wish to arm and those you wish to disarm, then
select the “execute” command.
If a partition is already armed, already disarmed, or is not ready to be armed, an error
message will appear. The message will indicate which partitions were already
armed, already disarmed, or not ready to be armed.
The computer will verify that the panel armed or disarmed the requested partitions.
If any partition(s) failed to arm or disarm, a message will appear to indicate which
partitions did not arm or disarm.
Bypass Zones
This option displays a Bypass Status Screen. Before this screen is shown, the
current Bypass Status will be uploaded. “Yes” or “No” will be displayed beside each
zone number. Toggle between “Yes” and “No” using the cursor keys to determine
which zones will be bypassed:
• “Yes” indicates that the zone will be bypassed
• “No” indicates that the zone will not be bypassed.
On the PC4020, PC4010 and PC4000, an asterisk (
∗
) may appear to the left of the
zone number: the asterisk indicates Bypass Memory. The zones marked with an (
∗
)
were bypassed the last time zones were bypassed on that partition. After selecting
which zones to bypass, press the [ESC] key to call up a menu to download the
changes to the control panel.
- DOWNLOADING 1
- SOFTWARE 1
- Please complete other side 2
- COMPUTER INFORMATION 3
- FORM TO: 4
- IMPORTANT 6
- 8
- DOWNLOADING SOFTWARE 10
- DLS-1 v6.7P 12
- 1 GETTING STARTED 14
- 1.1.2 Printer Requirements 17
- 1.1.3 Networking Support 17
- 1.1.4 Memory Requirements 17
- 1.1.1 Mouse Requirements 17
- 1.3 Setting Up PC-Link 18
- For Windows 95: 21
- Keyboard Functions 23
- Mouse Functions 25
- Cursor Movement 25
- Feature and Option Selection 25
- 2 USING THE DLS-1 SOFTWARE 26
- Step-by-Step Instructions 28
- Programming Manual 29
- 2.2 Run the DLS-1 Software 33
- 2.3 Log On 33
- 2.5 Select a File to Edit 35
- P-16 and P-1664 36
- P-16, P-1664 and DC1664 39
- 3 DLS-1 FILE MENUS 42
- 3.1 Main Menu 44
- 3.2 Edit a File 44
- PC4000 Panel Notes: 45
- Appended 49
- • Arm/Disarm 55
- • Alarm Memory 55
- • Bypass Zones 55
- PC3000 Panel Notes: 60
- System Status Information 61
- Record of Last Eight Changes: 61
- Zone Information 61
- Bell Test 65
- PGM Output Control 65
- Terminate Call / Hang Up 65
- Exit From This Menu 65
- DC1664, P-16 and P-1664 Menus 65
- 3.2.2 Wait for Panel to Call 69
- 3.2.3 Execute Batch Files 69
- 3.4 Notes for Section 3 71
- 4 WORKING WITH DLS-1 FILES 72
- 4.1 Create a File 74
- 4.2 Rename a File 75
- 4.3 Delete File(s) 76
- 4.4 Transfer File(s) 76
- IMPORTANT NOTE: 77
- 4.5 Default File Maintenance 78
- 4.6 Printer Functions 78
- 4.6.2 Print File List 79
- 4.7 Access Code Maintenance 80
- 4.8 Program Configuration 83
- [F5] Colour Selection Routine 85
- 4.10 Operations Log 88
- Store Operations Log to Disk 89
- 4.11 Create Batch File 90
- 4.12 Log Off 92
- APPENDICES 94
- Appendix B: AUTOEXEC.BAT 96
- Appendix C: Error Messages 97
- Modem Command File 98
- Modem DIP Switch Settings 98
- Modems Supported by DLS-1 99
- Modems Not Supported by DLS-1 99
- TYPICAL DIP SWITCH SETTINGS 100
- Appendix F: Glossary 101
- PC4010 Diagnostic Indications 108
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Digital Security Controls PC1575
Systemy kontroli dostępu bezpieczeństwa Digital Security Controls PC1616 Instrukcja Instalacji
(53 strony)
(53 strony)
Systemy kontroli dostępu bezpieczeństwa Digital Security Controls PC1575 Instrukcja Instalacji
(10 strony)
(10 strony)
Systemy kontroli dostępu bezpieczeństwa Digital Security Controls PC1575 Instrukcja Użytkownika
(4 strony)
(4 strony)
Canon Leather Soft Case 70 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Akcesoria komunikacja Canon Leather Soft Case 70.
Dostarczamy 1 pdf podręczników Canon Leather Soft Case 70 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentarze do niniejszej Instrukcji