Digital Security Controls PC1575 Instrukcja Instalacji Pobierz pdf (Strona 69)

Initialize Modem

Selecting this option will re-initialize the modem using the current defaults including

the setting stored in the Modem Command File (MODEMSTR.FIL). Use this feature if

the software is unable to automatically re-initialize the modem.

Terminate Call / Hang Up

Once editing is complete, choosing this selection will hang up the call with the panel.

Since the panel and the modem will stay on-line after the first communication, you may

wish to hang up the modem and the panel while changes are being made to the Work

File and reconnect when ready to upload or download the Work File to the panel. This

must be done before exiting the “Edit a File” section of the program.

3.2.2 Wait for Panel to Call

NOTE: PC4000 panels do not support this feature unless they are equipped with

version 1.3 software or later. PC5010 v1.x does not support this feature.

This function is used whenever an incoming call from a panel is expected. Calls from

panels may originate in two ways: as a user-initiated request for downloading, or as

an automatically initiated periodic request for downloading from the panel. When

the panel places a call, the DLS-1 software will answer the phone on the number of

rings programmed in the Program Configuration section. The DLS-1 software will

then attempt to match the panel with the correct Work File by using the Panel

Identification code. The Work File is retrieved and if the remaining access codes are

correct, the “Edit a File” editor appears. All download functions may now be

performed using the [F3] and [F4] menus. It is very important that all panels and

Work Files have

different

identification codes. If two files have the same code, the

DLS-1 software may match the panel with the wrong Work File. Do not confuse this

function with the “Execute Batch Files” function. The “Wait for Panel to Call” function

requires an operator present to execute any downloading functions. The “Execute

Batch Files” function does not need the presence of an operator.

3.2.3 Execute Batch Files

NOTE: This feature is not yet supported by the PC5015, PC5010, PC5008, PC4020,

PC4010, PC4000, PC1575/1580, PC1565-2P, PC1555/1565, PC580/585, PC560,

PC550 or Sur-Gard panel software.

This function is used to place the DLS-1 in automatic answer mode in which

incoming calls from panels are matched up with corresponding Batch Files (list of

commands to be executed). The Batch Files are created via the function “Create

Batch Files” and are erased after being executed. A detailed itemized print out is

generated as each Batch File is being processed. The print function is an option. If

there is no printer connected, the operation will work properly, except a printout will

not be generated. If you are uisng DLS-1 on a network, do not use a shared printer.

If a match is not found, the call is terminated (i.e. no Batch Files). The printout will

only identify the unmatched calling panel if a Work File exists for it.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 109 110

Brak uwag

Digital Security Controls PC1575 Instrukcja Instalacji Strona 69